How To Use A Qep Tile Saw

Our Reader Score
[Total: 2 Average: 5]
Studies have shown that many tile tasks cannot be done by using a wet saw. A Qep tile saw is often used for this type of work. Complicated angles and cuts are easy to perform with the help of a Qep tile saw. This is because it remains a power tool that anyone can find comfort with when used.

In most cases, you will find wet saws being equipped with a diamond cut blade. Wet saws can easily perform diagonal, straight and miter cuts through a gamut of stones and tiles. A Qep saw can usually cut tiles up to 1-1/4 inches in thickness. The most important thing is understanding the whole concept of using the device.

Have you been searching for the best guide on how to use Qep tile saws? Will you be happy using a Qep saw without any stress attached. This content will unleash a step-by-step guide on how to use Qep saws easily without any danger.

7 Easy Steps to Use Qep Tile Saw

QEP 22650Q 650XT 3/4 HP 120-volt Tile Saw for Wet Cutting of Ceramic and Porcelain Tile

QEP 22650Q 650XT 3/4 HP 120-volt Tile Saw for Wet Cutting of Ceramic and Porcelain Tile

Step 1:

To start with, you can use a T-square and a pencil to fashion out a line on the tile you are planning to cut. The Qep saw usually come with an adjustable rip fence for easy cuts. The fence must be removed first for easy operation. Remember that the fence runs from the front of the table to the rear position.

The fence operates in this format to align the blade with the line you drew. Now, go ahead to reattach the fence once you have paralleled the tile with the blade. With this idea, you will be on the safe side of using the Qep saw effectively without any stress.

Step 2:

The tile will have to be properly positioned against the fence and turn on the Qep saw. In a slow even manner, ensure to bring down the blade on the tile. It is important to know that the Qep saw usually comes with an in-built water basin that keeps the blade cool. The blade should be used carefully and remove any small tile piece that are left behind after each cut.

Step 3:

Next on the list is to make several diagonal and straight cuts on a couple practice tiles. This should be done prior to commencing on making cuts through tiles you will use in the task. Provided you are able to follow this step, using the Qep saw will not be difficult again.

Step 4:

A corner area of a tile is properly fed into the saw. Go ahead to pull gently to start making a notch. The tile should be turn around and feed the Qep saw through again to finish the process of the notch. It is important to position one corner of a tile against the saw blade for rounded edges in areas of a room.

It should be moved in a gentle half-circle motion for the best result. Your fingers should be kept away from the blade at all times. This is one of the best tips to help you get effective result when planning to use a Qep tile saw. You will not be confounded when applying the fourth step.

Step 5:

The miter guides should be used to make diagonal or straight cuts. With the help of the cutting table hinges, adjustment can be easily done. Adjustment can be done for 15-, 30-, and 45-degree miter cuts.

Step 6:

You will have to check the water level in the container or basic between cuts. It should be properly topped when required. This will always keep the Qep tile saw in an optimum level of performance or operation.

Step 7:

The standard diamond blade should be swapped. This is a blade that can be used to cut marble, ceramic tile, stone and slate. It is also used for a porcelain-rated blade to cut out tiles. This type of blade should be used separately.

Conclusion:

From the simple explanation above, you will discover that the Qep tile saw require a special guide for use. This is the simplest way of using the tile. Following all the steps above will always make you remain safe when using the Qep saw. Normally, it is important to turn on when used. After use, ensure to turn off the device and clean properly to pevent corrosion of the blade and other active parts.

A power saw can be a considerable purchase. That’s why the few minutes that you spend on reading power saw reviews is time well spent. Not only can you save money but you can also avoid headaches by purchasing only the right tool for your need. Here, I share my personal experiences and honest reviews about power saws to help you sense what it is like to work before you actually purchase one. My experiences and opinions act as a litmus test for first time users and for those who want to upgrade their power saws. Wish to help you identify the most significant factors that should influence your decision when buying the best power saws.

1 Comment
  1. […] is advisable to follow the instructions for how to use a qep tile saw in order to use it […]

Leave a reply