Homeowners in today’s world take on many more projects themselves than they have in the past. The state of the current economy has caused people to seek ways to save some money, and one of these methods is with do-it-yourself home improvements instead of hiring a contractor, which can be expensive and time-consuming.
Some basic familiarity with the project you want to accomplish and the tools you will need to use is very important to success. Woodworking projects in particular can be tricky if you are not sure of the proper tools. With so many choices on the market when it comes to power saws, it is important to educate yourself as to what each type can do and which is best suited for your job at hand.
Exactly what is a power saw and what can it do for you? In simple terms, a power saw is any tool used for cutting wood or another type of material that either runs on electricity or via a battery.
Many available in the marketplace today are cordless and run on a rechargeable battery, allowing you the freedom to take the saw right to the site of your project, eliminating the need to carry wood or other products back and forth from your cutting location.
Knowing which saw is right for your project is one that takes some investigation and knowledge.
- Band Saw
- Circular Saw
- Jig Saw
- Metal-Cutting Saw
- Miter Saw
- Reciprocating Saw
- Table Saw
- Tile and Masonry Saw
Band Saw: Uses, Types, and Buying Tips
You probably used one in woodshop back in high school and never gave it a second thought – until now. If you are looking to make cuts and curves in wood with precision and accuracy, there is no better power tool to seek out than the band saw. There are several things you may want to keep in mind when exploring getting this tool for your own, including the uses, different types available and some general tips that may help you make your decision.
Band Saw Types
A band saw is most typically used to make curved cuts or intricate design work on wood. Most often, there are two main types of a band saw. The first is a floor standing model that has its own cabinet. These are usually owned by those who have a professional use for the tool, such as woodworkers or contractors.
The cabinet versions of this device usually have more features and a larger motor included, along with a stronger frame that provides a sturdier base and allows for more consistent cuts.
Of course, you can still get quality results using the second variety of this tool, which is a shorter model designed to be mounted on a stand or bench. A lot of this depends on the features available on the smaller units you examine.
Whichever type you choose to work with, there are features you will want to be aware of and look for to make your work more efficient. Having multiple blades for this saw can help you eliminate the need for having several different types of cutting tools in your workshop. A variety of blades will allow you to use the saw not only for cutting wood, but also for cutting other materials like, metal, piping, and plastic.
Band Saw Buying Tips
One of the features to look for first when shopping is the depth of the cut. The depth of the cut is the distance between the upper blade guides and the table of the saw. This distance will allow you to determine the thickness that can be cut when using this tool. Many instruments now feature an optional riser so the depth may be expanded. This means that some of the less expensive units equipped with the riser can accommodate a thicker material.
Another important element to examine before purchase is the throat. The throat is the distance from the vertical frame part of the body of the saw to the blade itself. The smaller bench top versions typically have a smaller throat, ranging anywhere from twelve to fourteen inches. The larger, cabinet models can often have up to eighteen inches.
The size of the motor used by the saw may be another consideration for you. Many of the models designed for typical home use have an engine of three-quarters to one horsepower. Professional-grade saws, most often used by contractors and the like, usually have much larger motors that have variable speeds. The variable speed may not be of great importance to you since cutting at slower speeds provides a more precise cut and finish on materials such as plastic and metal.
There are other features you may want to consider when buying a saw of this type. You will want a steel or alloy table that is capable of a forty-five degree tilt. This will allow you perform wider angle cuts for particular curves and designs you may want. Also, many are equipped with a dust collection port that can hook directly to your shop vacuum for east clean-up of your work.
Band Saw Uses
Once you have selected the style and features you need for your saw, you can tackle some of those projects you have wanted to perform. Since it is ideal for creating ornate designs and curves, perhaps you can use it to create the shapes you are looking for on the slats of a chair or rocking chair. Maybe you have always wanted to create a particularly curvy mantle clock for over your fireplace or in the den. Creating the clock case will be much easier with this equipment.
Adding a band saw to your workshop arsenal will assist you in enhancing the types of projects you undertake. You will find that you have more versatility in what you can create and work towards. As with any type of cutting tool, you want to make sure you wear the appropriate protective eyewear while working and that you keep your hands and any loose jewelry away from the blade and its path.
While this type can be easier to work with, there can still be danger involved if you do not take the proper precautions. You will also want to make sure that you keep it properly maintained to insure the long life of your device by routinely emptying the cabinet of any accumulated dust and checking the proper tensions of your belts and blade.
Circular Saw: Uses, Types, and Buying Tips
If you have a lot of home projects you would like to try and conquer on your own, the first place to start is making sure you have all the right equipment necessary to do the job.
If you walk into any home improvement or hardware store, you may feel overwhelmed by all the options that face, particularly when it comes to choosing any type of saw. This may seem truer when trying to find the right circular saw for your work.
Examining all the options and features available and which best suits what your use will be are all important things to consider before you make a purchase.
This particular cutting tool is one of the more popular among do-it-yourself workers. They allow you to take on many woodworking and carpentry projects that you may otherwise have to pay good money to have performed by professional contractors or carpenters.
Doing a little homework before you get started can be a great benefit to you in the long run as to what type and features you may need.
Circular Saw Types
There are two basic types available to you for purchase. The first is a worm drive circular saw. Simply put, this saw is called this because it uses a worm gear to transfer power from the motor to the blade. This process increases the amount of torque put on the blade, thus giving you more cutting power.
This device can cut through nearly any material, but these saws tend to be quite heavy, ranging from fourteen to sixteen pounds. This style is really more for the professional worker who will be doing a great deal of cutting in the construction field.
The more popular and some would say more appropriate style for the average person is the sidewinder. It is more often lighter than the worm drive, averaging about ten pounds per unit.
This saw is also less expensive than its counterpart, and because it is lighter, it can be much easier for a person to handle since you are less likely to get tired quickly from the weight of the machine. A good sidewinder that is maintained properly can last you for many years at an affordable price.
Circular Saw Buying Tips
There are several desirable features to look for when choosing a sidewinder. One of the nice features is that they are adjustable for either a left-handed or right-handed person. Depending on what you want to use, this can make things much easier for you when cutting.
Having the blade positioned properly allows you to get a better view of your cutting so everything can be more precise. Cut visibility can make all the difference in any project, so make sure you get the saw best suited for the hand you use.
A couple of conveniences are available to help make your experience with this saw a better one. Look for a saw that offers knobs or levers that allow for quick and easy adjustments to depth and angle so you do not have to waste time making changes.
Try to find a saw that has easy to read guide marks so you can make changes quickly and accurately. Having a spindle lock can help you make blade changes faster and easier. This will allow you to lock the blade in place while you use a wrench to loosen the blade’s retaining bolt so you can change it out.
Another feature to seek is finding a saw that has a ball bearing motor. Higher quality saws will use a ball bearing motor as opposed to one that uses bushings. A ball bearing motor provides less friction, operates much quieter and thus will have a much longer life span for you. This feature is a key one to keep in mind when you are doing your research for purchasing.
Circular Saw Uses
Many people view the circular saw as the one saw they need to have in their tool shed. It is often turned to for any project that can be effectively done with a hand saw. It is ideal for cutting all types of plywood, sheetrock, framing materials and even some smaller pieces of trim. The beauty of this tool is that it is also good for some material that is not wood, like plastic or masonry material. Simply switching the blade will allow you to work on other things.
Adding a circular saw to your do-it-yourself equipment can assist you with a multitude of projects. Whether you are framing out a new room or addition, cutting sheetrock for the walls or paneling for your den, this tool can assist you with all those chores. With some basic maintenance and care, it will last you for many years. As with any project, make sure you wear appropriate protective eyewear to protect yourself from any dust or flying particles.
Jig Saw: Uses, Types, and Buying Tips
You see all these great designs and ideas on television on do-it-yourself shows or as demonstrations at your local hardware store. They do not seem difficult to accomplish or master, and you think you may have even something more artistic in mind to make for your own home.
Having just the right tool by your side to do these things is an absolute must. When you know you will have to do cutting that may require precision or working in smaller spaces, turning towards the use of a jig saw may just be the answer.
Jig Saw Types
The jig saw, or bayonet saw as it is sometimes called, is mainly used to cut designs, curves and custom shapes of all types. Traditional jig saws are handheld, with the handle normally attached to a smaller, thinner blade than many other saws.
With the advent of power tools, this one is now equipped with an electric motor and a saw blade.
The blades are normally fit into the tool in two manners. The first would be using a screw to hold the blade in place. This is seen in many older models. The newer, more modern designs simply have a slot for the blade to lock into place.
There are several blades available to use with the saw, depending on the type of cutting you want to be able to do. The blades are designed to be both flexible and very thin so that they are easy to maneuver.
Jig Saw Blades
Several different blades are available for you to add features to your tool. Of course, the universal cutter is perfect for helping you cut through wood. The bayonet blade can be used to help you cut through the laminate. The metal cutting blade naturally can be used on metal such as sheet metal. A carbide ceramic blade can be used to help you work with various types of tile.
If you possess the different blades you should be able to use them on a wide variety of projects.
Jig Saw Uses
The number of tasks you can work on using this power saw seems endless. One of the more basic uses is if you need holes cut while working on a sink or a basin. The flexibility provided by this particular device is perfect for allowing spaces cut for a faucet.
It is also ideal for cutting holes in cabinets for pipes, such as a bathroom vanity. You could even use it to cut space in an entertainment center where you needed an access for electrical outlets. Jobs such as this where the spaces may be tight make this an excellent tool for these occasions.
Of course, many people use this saw when they want to make intricate or detailed cuts for design work. Again, the ability of the blade to move easily and be flexible allows the blade to be the perfect choice for custom and complex cuts.
Many people use stencils to sketch out artwork they would like on pieces of wood or sheet metal. This type of cutting tool will let you bend around the shape perfectly, so that you can go around the stencil lines. After accomplishing that, all that’s left to do is sand or paint your image so it looks just the way you want it.
A more unique use for the saw actually comes from the name of the saw itself. You can create your own jigsaw puzzles using this tool. Taking an image that you want to make into a puzzle, making it large enough to fit the wood you want to put it on and then printing the image on paper with a sticky back can get you started.
You would then apply the paper to the wood, turn the image over to the wood side, and trace out the design you would of your pieces in a marker. Simply follow along your marked lines with the saw to cut out your pieces, sand any rough edges and try fitting the puzzle back together. You may have to trim some edges with your saw, but when you are done you can have your very own, personalized entertainment.
It may take a little practice in the beginning, but once you are comfortable with this tool, you may find yourself using it for all kinds of creative works. Like any woodworking instrument, using a jig saw takes great care.
Always be sure to wear protective eyewear when doing any kind of cutting to avoid injury. Also, be aware of the position of your hands and fingers to stay away from injury and try not to do work wearing loose clothing or jewelry that may cause a problem.
Metal-Cutting Saw: Uses, Types, and Buying Tips
You have worked on many wood projects, perhaps both at home and on the job. While it takes a special hand and skill to master the tasks involved in woodcutting, working with metal can take even more.
The work can be harder, more dangerous and less forgiving if a mistake is made. Being sure you have the right kind of equipment before you tackle a job involving metal can make all the difference.
Learning as much as you can about a metal-cutting saw before you purchase one will help you save time, money and make your experience working with metal better.
Metal-Cutting Saw Types
Back in days past, metal-cutting saws were all handheld and manual. Everything was driven by the user’s hand strength and ability. The tasks could be long and tedious and often far from precise.
Today, thanks to the advancements made in modern technology, saws used primarily to cut metal have come a long way. Instead of having to use a traditional hack saw, you can now choose between saws that are bench top, stationary or hand held. They are all power driven by electricity, and many of the handheld models look very similar to a traditional Circular Saw.
If you know you are going to be working with a lot of metal, you will need to find the saw that works best for you. A metal chop saw is one of the models that might fill all your needs.
These saws are surprisingly lightweight for the tough tasks they can perform. They provide you with a very accurate and clean cut with rapid speed, often eliminating the need for you to apply any acetylene torches to the metal you have cut to remove any imperfections.
Metal-Cutting Saw Buying Tips
There are several features you may want to consider when doing your investigation before purchase. Since there are many brands available and all may seem good to someone just starting out, looking for a few key things in what you want may help you narrow the field.
First, you may want to seek out a saw that features a “D” shaped handle. This shape of handle will provide you with ability to apply easier down pressure on the arm of the saw than a saw with a pistol grip.
You will also want to find one that has a heavy base to it. You will then have much more stability while cutting with a heavier base.
The size of the motor may be another feature you want to examine. Finding a saw with a fifteen amp motor is probably ideal for all your projects. A motor like this will likely provide you with more than enough power for any task you would be using it on.
Metal-Cutting Saw Blades
There are two basic types of blades that are most commonly used with this device.
An abrasive blade, which is most often fourteen inches in diameter, is made primarily of fibers that have been bonded and pressed to form a solid circle making up the disk. These blades are more inexpensive, however they may not last as long and wear out quicker.
The alternative blade to this is the dry-cut blade. This blade is designed to cut through metal at a much faster rate and will provide you with a much smoother cut than the abrasive blade. This type tends to be more expensive than its counterpart, but it may be the better investment for you since it will be more efficient and is made to last longer.
Metal-Cutting Saw Uses
Once you have settled on the saw that is best for your needs, you can begin on some of those metal projects you have always wanted to tackle.
Perhaps you have always wanted to make your own glass table with aluminum or steel legs, and maybe some chairs to go along with it. Having the capability of cutting the legs for your table and chairs will then let you create the design of the table you want instead of trying to find it in a furniture store.
Cutting through piping that you may need for a variety of projects will be much easier and quicker. If you want to make your own fencing for your yard, you can cut the stakes on your own to the precise size you need.
When using a metal-cutting saw, there are certain dangers involved that you must take into consideration. It is important to always wear protective eyewear when doing any type of cutting, and even more so when working with metal. Cutting any type of metal will create sparks that will fly about. There is also the possibility of metal shavings going into the air while working that could easily go into your eyes without protection. Taking your time with safety will create a more comfortable and productive experience for you.
Miter Saw: Uses, Types, and Buying Tips
When creating your very own woodshop, workshop or tool shed, there are many basics that you will cover. One of the trickier aspects of getting all of your equipment together can often be deciding on what types of saws you need to have.
The types of projects that you typically get involved in may determine exactly which types of saws you purchase. However, owning a good miter saw may prove to be a wide investment on your part. The versatility and general handiness of this device may find you using it more than you originally thought.
Miter saws were created with the task of creating accurate and precise crosscuts and miters in a piece you are working on. A miter is a joint that is created by beveling two parts to be joined, most typically at forty-five degree angles, to form a ninety degree angled corner.
Perhaps the most common use of this action would be when creating a picture frame or joining molding together around a doorway or on a floor.
Miter Saw Types, Tips, and Features
Having a power saw of this nature can help make creating miters very quick and easy. A miter saw comes in many styles with varying features, so doing some research may be required on your part to decide what your needs are and which type fits those needs.
While adding more and more features often increases the price of the item, there are certain features that are desirable to provide you with the best piece of machinery for the price you are willing to spend.
One of the first things you need to decide is whether you want a single bevel or a double bevel saw. A single bevel saw can tilt the blade only to one side. This means that in order for you to cut a corresponding board to make a joint, you need to swing the board around to the opposite side instead of making an adjustment on the saw itself.
A double bevel will allow you to tilt the blade in both directions, thus eliminating the need for you to turn the corresponding board around.
Most saws of this type in the marketplace today come readily equipped with some standard features like a carbide-tipped blade, electronic brakes and blade guards, but there are other features you may want to enhance your saw to make it easier to use.
The safest type of blade guard to seek out is a self-retracting one which will cover the blade completely when you raise the blade. This is an excellent safety feature to have on your equipment.
Many devices are also equipped with a lock-off switch to help prevent the machine from accidentally starting or being turned on. While this is excellent for safety when children might have access to where the saw is, it is also pertinent to adults who may accidentally hit the on switch while setting up the blade to make your desired cut.
Another feature you may want to explore is having the saw equipped with an adjustable laser guide. Laser guiding will help produce the most precise cuts for you, but having the ability to adjust the laser guide on your own can make things even more accurate for you. Having a device with twin laser guides that are adjustable may be even more desirable for you to provide the best accuracy.
A final feature to consider would be how the machine handles dust collection. Using a saw of this type can create a great deal of sawdust, so you may want one that has the feature of a dust bag attached to it for easy collection. Many are also equipped with a special port that allows the attachment of your shop vacuum directly to clean things out.
Miter saw Uses
Once you are using this saw, you may find that you can create all kinds of molding for your home. The doorways and floors of your house can be decorated in many ways, and you can even design your own crown molding with the proper angles.
Perhaps you have always wanted to make your own picture frames out of a particular wood or using a special color for that painting or photo you have always wanted to frame. With this saw, making a picture frame of your own is right at your fingertips.
When you are doing any kind of cutting with any tool, safety is of vital importance. Wearing your protective eyewear is always important to avoid any injuries.
A miter saw, even the quietest versions available, create a very large volume of noise. Hearing protection when using this device is of the utmost importance to avoid any hearing damage. Ear bud protection or protective earphones should be worn when performing your tasks. Once all your safeguards are taken, you can then go about creating all of the designs you have wanted to try.
Reciprocating Saw: Uses, Types, and Buying Tips
When you own your own home, inevitably there will be home improvement projects that either must be performed for the general upkeep of your home or there will be changes and improvements you want to make, to create your own space with your own style.
Whatever the case may be, a litany of tools may be required to perform some of the tasks you find yourself confronting. Along the way, the situation may arise where you find yourself in need of a reciprocating saw to assist you in your work.
Before purchasing one, it is best to always do some research and find what features may fit your needs best for the projects you will be working on.
A reciprocating saw is typically a saw in which the cutting is accomplished through a series of push and pulls in a reciprocating motion of the blade of the saw. It is not often one of the first tools a person adds to their workshop.
While it may not seem essential right away, if you plan on doing some serious home renovation, this device will become important to you.
Reciprocating Saw Types and Features
Much like a jig saw, this device allows you some flexibility with putting the blade into tight spaces. The blade itself works in a similar manner to that of a Jig Saw, moving rapidly in and out and up down.
There are several features available that you may want to look for before you decide on a purchase. As with any power saw, the amp rating is something you will want to consider. The higher the amp rating, the more powerful your saw will be. Most saws of this sort have a rating between five and fifteen, so if you are seeking one with the most power you may want to find a fifteen amp motor.
Having variable speed may also be an option you would like. Having control over the speed of your device can be an important feature, and finding one with an adjustable speed may be to your liking. This preference can give you much better control over your tool when making your cuts.
In the marketplace today you will find this sort of tool with an option of orbital blade movement. This option means that the blade of the saw has the ability to move in an elliptical motion, which may be desirable when working with wood so you can work through the wood quicker. Having the option to switch back and forth between a straight cut and an orbital cut can be quite beneficial.
Another feature to consider is whether you would want a corded or cordless saw. A cordless saw brings you the option of not being locked into a location and may be ideal for quick jobs; however, you may want to have extra batteries at your disposal if you think it might be an extended job. Corded saws may provide more power for you, and they are lighter than the cordless versions since there is no battery pack involved in the design.
Reciprocating Saw Uses
The projects that can employ this type of implement are numerous. Nearly any type of demolition that you may want to accomplish can be done with this device. The saw is designed to effectively cut through wood, plaster, drywall, fiberglass, stucco, sheetrock and even metal.
In order to cut through metal, you would need to switch to the appropriate blade, but this can easily be done in moments. You will find that you can quickly cut through an existing wall that you want to remove or take down old sheetrock that needs to be replaced.
These saws are also often used in many plumbing projects. It is a great tool for cutting pipes to the proper size for a sink or cutting through pipes when removing and re-routing them as part of a project.
Keep in mind that if you are cutting a pipe with the intention of re-using it that you may need to pay particular attention to the precision you use to make sure your length and dimensions are correct.
With proper care and maintenance, your reciprocating saw should last you for many years. Do not forget that safety precautions always need to be taken when using any sort of cutting implement. Protection for your eyes and ears can be vital when working with a saw and making sure you are not wearing any loose clothing or jewelry that can become entangled in the machine is also important.
When using this type of saw, you may also want to use a dust mask to avoid breathing in anything from cutting drywall or fiberglass.
Table Saw: Uses, Types, and Buying Tips
You have probably seen them in many woodworking shops or you may have even used one in shop class when you were in school. They can easily become a vital piece of any tool set and may be one of the most versatile and most used pieces of equipment that you own.
A table saw can help you accomplish nearly all the tasks and projects that you may want to perform. Knowing what its capabilities are, its features can be and the types of projects you can do is just the first step you should take before you undertake its purchase and use.
A table saw can be used for a wide variety of woodworking chores, such as grooving, shaping, creating miters, squaring, ripping and joining pieces. Almost all of your woodworking tasks can be done using this device. If you have a high-quality piece with the important features, you will find that all of your woodworking will be much easier to do.
Table Saw Types
There are several different types of table saws available on the market today, but most of them fall into one of the following classifications:
- Contractor saws
- Portable saws
- Cabinet saws
- Hybrid saws
Finding the class that best suits your needs can help you decide which device you should purchase.
Contractor saws are, naturally, geared towards those who are working in the construction industry and require the ability to not only move the device from place to place easily and are priced affordably, making them ideal not only for the small business owner but for the home user as well.
Portable saws, as the name states, are designed to easily be moved around, making them perfect for woodworkers or carpenters who need to perform tasks on site.
They can typically perform all the functions of the larger saws in shops but on a smaller level.
Their motor tends to be lighter, which can also mean they produce less power.
The cabinet saw is the typical class that you would find in a professional shop or in a school. They are much more substantial than any of the other classifications, made of much more steel and cast iron, and possess much more powerful motors than their counterparts.
The motor is in a cabinet base, making it much quieter than others of this ilk, and they are designed to withstand long use with the ability to cut through heavy stock for hours on end with less noise and vibration and more accuracy.
Hybrid saws are a more recent addition to the technology. The marketplaces revealed a need for capturing some of the features of the cabinet version yet still have the portability and affordability of the contractor saw.
These hybrids seek to combine the best features of the two types, providing a base similar to that found in the cabinet style to give the sturdiness and stability that is sought but in a smaller, more portable size.
Table Saw Features
Whichever class may be best for you there are also features that you may want to assure you get the best use of this product. Making sure you have a quality fence system is an important factor when considering saws like this.
You want a fence that is always parallel to the blade and has the ability for you to make any adjustments when they may be necessary. You will also want a miter gauge for when you need to make any crosscuts at an angle.
Look for one that is clearly marked so you can easily set things for the proper angle.
Table Saw Uses
Once you have a table saw, you can start conquering all of your woodworking projects. The sky is the limit with what you will be able to do. You can custom fit and make your window frames. Produce the cabinets you have always wanted for your kitchen, workshop or garage.
You can create a wide variety of furniture pieces, from tables of varying woods to rocking chairs and benches. If you are looking to start some home improvement projects, you can easily work with the plywood and two by fours you need for studs and wall framing. You will find there is not much that will be difficult for you using this tool.
Keeping your tool properly maintained will help it last for many years. You will want to keep it tuned so that it runs smoothly and cuts properly.
A table saw can also provide many dangers in a workshop, so the proper care needs to be taken to avoid accidents such as kickbacks. Always make sure you wear the proper protection, especially including protective eyewear and hearing protection.
It is also a good practice to avoid wearing loose clothing or jewelry when performing any kind of tasks around this equipment. A little safety can help you avoid catastrophic injury.
Tile and Masonry: Uses, Types, and Buying Tips
A tile and masonry saw is not a piece of equipment that one may find in the typical home workshop or tool shed. However, if you are planning on doing any type of renovation or installation of ceramic tile or brick, this type of implement is no longer an option, but a necessity.
You will find your project moves much more smoothly if you use the right tool for the job, and this type of saw can make your life much easier.
Using and installing ceramic tile can greatly enhance the beauty of any home. Whether you choose to install it in the bathroom, kitchen or entryway, you will find that your floors, shower stalls, and bathroom walls can all look amazing with this modification.
What you may also find, however, is that simple handheld tile cutters will not be efficient for you either in time or money. Finding the right power tool to use on this project can not only save you a great deal of time but can save you money by avoiding broken tiles and cuts made in error.
Even purchasing an inexpensive power version can help increase your productivity and save your tiles.
Tile & Masonry Saw Features
There are several features that you want to consider when you are making a purchase of this kind. The size of the motor may be of importance to you. Inexpensive models typically have a much smaller motor that may burn out much quicker than one would expect. More expensive, table top models are equipped with a larger, stronger motor, helping you to make short work of your cutting tasks.
Making sure your unit has the proper blade is also of great importance. You will want to be sure that the product is equipped with a high quality, diamond tipped blade so you achieve optimum performance.
Regular blades will dull very quickly when used on tough materials like ceramic or brick. You require a blade that will grind through the material and the diamond dust on the blade will help you accomplish this without dulling.
Perhaps the most important feature to look for is the cooling system that comes along with this device. Cutting through any type of ceramic or brick exerts a great deal of energy and thus creates heat. You need to have a water system in place to keep the blade cool and operating properly.
Many of these saws are available either with a water pump or with a pumpless system. Those without a pump draw the water it needs to cool from a faucet. A bucket is necessary with this so that the waste water can be drained into it.
Those with a pump system do not require a bucket as it simply recycles the same water you are using continuously as you work.
Along with a water pump feature, a misting feature is also helpful when deciding on your purchase. Many of these saws are equipped with a misting pump for your saw. This allows water to be sprayed on both sides of the blade to help keep it cool and prevent overheating.
If you are going to be cutting through brick and another masonry, you will need to decide between a handheld or tabletop version of the saw. The handheld saws are often equipped with a six or seven-inch silicon blade and can provide you with a relatively clean cut.
The tabletop is recommended for jobs requiring a great deal of cutting. The blades are much higher, often between fourteen and twenty inches, and they are also diamond blades to easily cut through a brick.
Tile & Masonry Saw Uses
You will find that you need these saws when you are installing any type of ceramic tile or other masonry product. Placing tile around a new bathtub or shower stall can not only look exquisite but add a great deal of value to your home. Using tile in the kitchen for the flooring or as a design on the walls gives you the flexibility of picking a unique design for both surfaces.
If you are looking to spruce up your outdoor living space, you can renovate your patio and add a brick outline or make the entire surface brick. You could even construct that brick barbecue that you have always fantasized about.
While using a tile and masonry saw can help you add beauty to your home, there are safety precautions that you should always take with this equipment.
Making sure that your electricity to your device is provided safely and properly is very important. Since this tool uses water and electricity, safety is a premium. Positioning the electrical cord lower than the outlet to create a drip loop for the water to drip off of is a priority for safe use.
Also, make sure there is a constant supply of water to avoid any dry cutting. As always, make sure you wear proper eyewear for your safety.