Offering versatility and safety in the shop and stability and mobility on the job site, the SawStop Contractor Saw (model CNS175-TGP36) delivers the performance you wish to have with the peace of mind only SawStop’s patented safety system can provide. The safety system detects when someone accidentally contacts the spinning saw blade, and then stops the blade in milliseconds — resulting in just a nick on a SawStop saw instead of the devastating injury. This model comes with a 36-inch T-Float fence system for added strength and increased precision as well as rails and extension table.
Maximizing Practicality, Precision, and Mobility
The SawStop 1.75 horsepower Contractor Saw is a synergy of mobility and precision. First, its heavy duty trunnion and cast iron table top ensure a steady and true cut, no matter the configuration. And with over 100 different potential configurations for the Contractor Saw, you’ll make this saw fit your needs.
The Contractor Saw features a well shrouded blade to reinforce dust collection and reduce airborne particulates. The shroud tapers to a 4-inch port for direct connection to a dust collection system. The zero clearance insert supports the wood during the cut and reduces tear-out and chip-out.
A Safer Saw
What if you could stop a saw blade and prevent a serious injury? That sounds like a truly good idea.Today, that idea is protecting woodworkers in tens of thousands of SawStop table saws in North America and around the globe.
The SawStop safety system includes an electronic detection system that detects when a person contacts the blade. The system induces an electrical signal onto the blade and then monitors that signal for changes. It can tell the difference between a finger and a piece of wood as the human body has a relatively large inherent electrical capacitance and conductivity, which will cause the signal to drop when a person contacts the blade.
When contact is detected, a fast-acting brake stops the blade, with a heavy-duty spring pushing a block of aluminum (called a brake pawl) into the teeth of the blade to stop the blade from spinning. The teeth cut into the aluminum and bind, thereby stopping the blade in about 3 to 5 milliseconds — or 1/200th of a second.
At a Glance
CNS175-TGP36 1-3/4 HP Contractor Saw
- Prevents serious injury with all the time-on protection
- Included 36-inch T-Float fence system provides smooth operation, precision measurement and sure lockdown without deflection
- Ideal for construction professionals, maintenance shops, hobbyists and DIYers, and shops with limited space
- Compatible with 10-inch standard blades and 8-inch dado sets
- Left tilting blade helps prevent wood from binding against the fence
- One-year limited warranty
when contact with skin is detected (view larger).
How It Works
#1 — Detect
- The blade carries a small electrical signal.
- When skin contacts the blade, the signal changes because the human body is conductive.
- The change to the signal activates the safety system.
#2 — Activate
- An aluminum brake springs into the spinning blade, stopping it.
- The blade’s angular momentum drives it beneath the table, removing the risk of subsequent contact.
- Power to the motor is shut off.
- All this happens in less than 5 milliseconds!
#3 — Reset
- Resetting the saw yourself is easy. Simply replace the blade and affordable brake cartridge and your saw is operational.
- The entire reset process takes less than five minutes.
Other safety features include a main power switch with lockout key to prevent unauthorized users from turning on the saw and a large start/stop paddle with hands-free shutoff that can be stopped with your knee, allowing you to safely stop the blade even when both hands are busy.
According to the Consumer Products Safety Commission, there is a table saw injury every 9 minutes, and 10 amputations on a daily basis in the United States. Even the most safety-conscious woodworkers are at risk of an accident. And when that accident happens, the consequences are life-changing: extreme pain and trauma, loss of income-earning abilities, and loss of the ability to pursue hobbies. It’s time to offer protection to yourself. The SawStop saw has saved thousands of fingers.
|Cast iron table||20 x 27 inches|
|Extension wing||12 x 27 inches|
|Blade||10-inch diameter, 5/8-inch arbor|
|Maximum depth of cut||3-1/8 inches|
|Dado||8-inch diameter, 13/16-inch maximum width|
|Dust collection port||4-inch diameter|
|Riving knife/splitter||2mm thick|
|Dimensions||69-1/8 x 45 x 34-3/4 inches (WxDxH)|
|Footprint||25-3/4 x 27 inches (WxD)|
What’s in the Box
1-3/4 horsepower saw with stand, 36-inch professional T-Float fence system, table extension, two adjustable legs, 10-inch 40-tooth combination blade, two stamped wings, blade guard assembly, miter gauge, riving knife, blade wrenches, and owners manual
69 1/8-inch w, 45-inch d, 34 3/4-inch h
Unmatched fit and finish with a keen attention to detail.
SawStop safety system
36″ Professional T-Float Fence System provides smooth operation, precision measurement and sure lockdown without deflection.
Mobility options like Job Site Cart and Mobile Base
Spesso comprati insieme
Questo articolo: Sawstop CNS175-TGP36 1-3/4 HP Contractor Saw with 36-Inch Professional T-Glide Fence System including Rails and Extension Table$1,799.00
|Number Of Items|